legacy

Use the legacy command to enable or disable the legacy solution, which gives all packets on the VNS high priority. The legacy command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.

After you run the legacy command, run the apply command to implement the changes.

legacy enable | disable

Parameters

enable | disable Enables or disables the legacy solution.
Note

Note

Legacy Wireless QoS support cannot be re-enabled once it has been disabled.

Example

The following example enables the legacy solution for the VNS:

EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# legacy enable
EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# apply
EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# show legacy
Legacy: enable