gateway-ipv6

Use the gateway-ipv6 command to specify an IPv6 gateway IP address. The gateway-ipv6 command is available from the topology:<named-topology>:l3 context of the CLI for the Admin topology only.

gateway-ipv6 A:B:C:D:E:F:G:H | none

Parameters

A:B:C:D:E:F:G:H Specifies the gateway IPv6 address.
none Clears the gateway IPv6 address.

Example

The following example defines the gateway IPv6 address:

EWC.extremenetworks.com:topology:Admin:l3:# gateway-ipv6 fd66:2280:2668::2