hs-ccap

Use the hs-ccap command from the hotspot context to configure the connection capability for the hotspot.

hs-ccap (add|delete) (ah|udp|tcp|esp) port (unknown|open|closed)

Parameters

(add|delete) Specifies whether to add or delete a connection capability.
(ah|udp|tcp|esp) Specifies the protocol.
port Specifies the port number in the range 0 to 65535.
(unknown|open|closed) Specifies the port status.

Usage

For protocols esp and ah the port number must be set to 0.

Examples

EWC.extremenetworks.com:wlans:hs:hotspot# hs-ccap add tcp 192 open