Use the aclist command to statically configure the IP addresses of Wireless Appliances for discovery. Use the no form of the command to remove any IPs either by address or by rank. IP addresses removed from the Wireless Appliance list are replaced in rank by the next listed IP address. Use the show function to list the added Wireless Appliance IPs by rank.The aclist command is accessible from the ap:<serial> context of the CLI. It is also available from ap:defaults if learnac is disabled (no learnac) in that context.
| IP Address | Specifies the IP address of the Wireless Appliance |
| rank | Specifies the rank number of the listed Wireless Appliance |
The following example adds three IP addresses to the Wireless Appliance list:
EWC.extremenetworks.com:ap:0409920201204003# aclist 6.178.34.54 EWC.extremenetworks.com:ap:0409920201204003# aclist 81.30.6.312 EWC.extremenetworks.com:ap:0409920201204003# aclist 167.232.92.39
The following example removes an entry from the Wireless Appliance list by IP address:
EWC.extremenetworks.com:ap:0409920201204003# no aclist 167.232.92.39
The following example removes an entry from the Wireless Appliance list by rank:
EWC.extremenetworks.com:ap:0409920201204003# no aclist 1
Print
this page
Email this topic
Feedback
View PDF
Download EPUB