custom

Use the custom command, within context wlan:<WLAN-service-name>:auth:captiveportal, to configure communications options for custom captive portal settings.

After you run the custom command, run the apply command to implement the changes.

custom local | web

Parameters

local Sets captive portal communications options to local
web Sets captive portal communications options to web

Usage

If customized captive portal content was previously downloaded to the controller using the copy-custom command, custom can only be successfully set to local. The internal or splash authentication mode must be set for this command to be available. For more information, see mode.

Example

The following example sets the captive portal communications options to web:

EWC.extremenetworks.com:wlans:new-wlans:auth:captiveportal# custom web
EWC.extremenetworks.com:wlans:new-wlans:auth:captiveportal# apply