secure-tunnel-control

Use the secure-tunnel-control command to enable or disable the encryption of control traffic between APs on this site and their controllers. The secure-tunnel-control command is accessible from the site:<named-site> context.

secure-tunnel-control (enable | disable)

Parameters

enable | disable Enables or disables secure tunnels between APs on this site and controllers.

Usage

The secure-tunnel command must be enabled before the secure-tunnel-control command can be run.

Example

The following example enables secure tunnels between APs and controllers on site1:

EWC.extremenetworks.com:site:site1# secure-tunnel enable
EWC.extremenetworks.com:site:site1# secure-tunnel-control enable