vsa-policy

Use the vsa-policy command to include policy information in the message to the RADIUS server. The vsa-policy command is accessible from the wlan:<WLAN-service-name>:auth context of the CLI.

After you run the vsa-policy command, run the apply command to implement the changes.

vsa-policy enable | disable

Parameters

enable | disable Specifies to enable or disable the inclusion of policy information in messages to the RADIUS server.

Usage

The vsa-policy command is not available when the authentication mode is guestportal. When the authentication mode is disabled, MAC must be enabled for this command to be available. For more information, see mode.

Example

The following example enables the inclusion of policy information in the message to the RADIUS server:

EWC.extremenetworks.com:wlans:test:auth# vsa-policy enable
EWC.extremenetworks.com:wlans:test:auth# apply
EWC.extremenetworks.com:wlans:test:auth# show vsa-policy
Policy as VSA attribute: enable