traffic-mirror-l2port

Use the traffic-mirror-l2port command to set the traffic mirror L2 port. The traffic-mirror-l2port command is accessible from the vnsmode:netflow-mirror context of the CLI.

traffic-mirror-l2port (none | esa0 | esa1)

Parameters

none | esa0 | esa1 Configures the L2 mirror port and the controller to none, esa0, or esa1.

Example

The following example sets the mirror L2 port to esa0:

EWC.extremenetworks.com:vnsmode:netflow-mirror# traffic-mirror-l2port esa0