apply

Use the apply command from the provider-config context to apply changes to the provider-config context.

apply

Usage

The following validation is necessary on the apply command:
  • At least one method needs to be selected.
  • At least one language with Friendly Name needs to be set.
  • ICON is required.

Parameters

There are no parameters.

Examples

Once the provider has been configured, use apply to apply the changes.

EWC.extremenetworks.com:wlans:hs:hotspot# provider-config https://Enetworks.com 
EWC.extremenetworks.com:wlans:hs:hotspot# hs-provider-methods oma, soap
EWC.extremenetworks.com:wlans:hs:hotspot# hs-provider-provider-frn1 ENetworks 
EWC.extremenetworks.com:wlans:hs:hotspot# hs-provider-icon bird.png
EWC.extremenetworks.com:wlans:hs:hotspot# apply