show

Use the show command in the l2ports context to display port information for the Wireless Appliance.

show

Parameters

None

Examples

The following example displays port information for the Wireless Appliance:
EWC.extremenetworks.com# l2ports
EWC.extremenetworks.com:l2ports# show
Status   Enable  Port   MAC                Untagged Vlan  Tagged Vlan
UP       enable  esa0   00:21:9B:98:B7:07  30             4,5,3,7,8,211
UP       enable  esa1   00:1B:21:40:58:D0                  4093
UP       enable  esa2   00:1B:21:3B:EF:02  4089
DOWN     enable  lag1   00:1B:21:40:58:D0  30             4,5,3,7,8,211
UP       enable  admin  00:21:9B:98:B7:05

The VLAN Service field specifies the VLAN IDs set on bridged at controller topologies for the specific physical port (in this case esa0).