vlan-policy

Use the vlan-policy command to map a VLAN ID to a policy.

After you run the vlan-policy command, run the apply command to implement the changes.

vlan-policy (add|update vlan-id policy name) |(remove vlan-id)

Parameters

add | update Adds or updates the mapping of the specified vlan-id to the specified policy.
remove Removes the vlan-id mapping from the policy.
vlan-id Specifies a VLAN to map to or remove from the specified policy.
policy name Specifies a policy to which a VLAN is mapped.

Examples

The following example updates the VLAN mapping (vlan-id 102) to the test2 policy:

EWC.extremenetworks.com:vnsmode:adminctr# vlan-policy update 102 test2