minbrate

Use this command to configure the minimum basic data rate for radio 2. The minbrate command is accessible from all radio contexts of the CLI.

minbrate min-rate

Parameters

Valid values for min-rate depend on the radio mode:

Radio Mode Minimum Basic Rates
a 6 | 12 | 24
ac-strict 6 | 12 | 24 | MCS0,1 | MCS1,1 | MCS2,1 | MCS3,1 | MCS4,1 | MCS5,1 | MCS6,1 | MCS7,1
an 6 | 12 | 24
anac 6 | 12 | 24
b 1 | 2 | 5.5 | 11
g 6 | 12 | 24
gn 6 | 12 | 24
n-strict 6 | 12 | 24 | MCS0 – MCS7
bg 1 | 2 | 5.5 | 11
bgn 1 | 2 | 5.5 | 11

Usage

The minimum basic rate must be lower than or equal to the configured maximum basic data rate and maximum data rate that clients can operate at while associated with the AP.

Example

This example sets the mode for radio 2 to g, then sets the minimum basic data rate to 12 Mbps:

EWC.extremenetworks.com:ap:defaults:ap3801:radio2# mode g
EWC.extremenetworks.com:ap:defaults:ap3801:radio2# minbrate 12