real_capture

Use the real_capture command to monitor beacons, association requests, probe responses, and data packets on the radio 1, radio 2, or ethernet of all APs. The real_capture command is meant to be used in conjunction with Wireshark tool to analyze traffic on the ap and is available from the ap:<serial> context of all APs.

real_capture start | stop time eth0 | wifi0 | wifi1

Parameters

start Begins monitoring the traffic on the ap.
stop Stops monitoring the traffic on the ap.
time The amount of time (in minutes) the ap monitors traffic. Valid entries are 0-3600.
eth0 Monitors the ethernet connection.
wifi0 Monitors the radio1 connection.
wifi1 Monitors the radio2 connection.

Example

The following example monitors traffic on radio1 of AP ap:0500008043050236 for 30 minutes:

EWC.extremenetworks.com:ap:0500008043050236# real_capture start 30 wifi0