flex-client-access

Use the flex-client-access command to enable or disable flexible client access to the wireless medium. The flex-client-access command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.

After you run the flex-client-access command, run the apply command to implement the changes.

flex-client-access enable | disable

Parameters

enable | disable Enables or disables flexible client access to the wireless medium.

Example

The following example enables flexible client access to the wireless medium:

EWC.extremenetworks.com:wlans:test:qos-policy# flex-client-access enable
EWC.extremenetworks.com:wlans:test:qos-policy# apply
EWC.extremenetworks.com:wlans:test:qos-policy# show flex-client-access
Flex client access: enable