show

Use the show command to display the current authentication settings of the specified individual WLAN service. The show command is accessible from the wlan:<WLAN-service-name>:auth context of the CLI.

Click to expand in new window
Examples

The following example displays the current authentication settings for the WLAN service named Lab126-12-AAA:

EWC.extremenetworks.com:wlans:Lab126-12-AAA:auth# show
No radius server has been selected
Priority  Name  Role  NAS IP              NAS ID        Auth Type
1         IAS   auth  Use VNS IP address  Use VNS name  EAP
1         IAS   acct  Use VNS IP address  Use VNS name
MAC-based authorization: disable
Authentication mode: 8021x
AP as VSA attribute: enable
SSID as VSA attribute: enable
VNS as VSA attribute: enable
Policy as VSA attribute: enable
Topology as VSA attribute: enable
Ingress rate control as VSA attribute: enable
Egress rate control as VSA attribute: enable
Interim interval (minutes): 0
Collecting accounting information of Wireless Controller: disable
With external: disable