trap-manager-v1v2

Use the trap-manager-v1v2 command to identify either the primary or secondary machine monitoring SNMPv1/v2 traps by IP address.

trap-manager-v1v2 1|2 (IP Address | delete)

Parameters

1|2 Identifies the primary or secondary machine monitoring SNMPv1/v2 traps
IP Address Specifies the IP address of the machine monitoring SNMPv1/v2 traps. The IP address can be either IPv4 (A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format.
delete Delete the specified trap manager.

Examples

The following example specifies the IP address of the primary machine monitoring SNMPv1/v2 traps:

EWC.extremenetworks.com:snmp# trap-manager-v1v2 1 192.168.1.5

The following example deletes the secondary machine monitoring SNMPv1/v2 traps:

EWC.extremenetworks.com:snmp# trap-manager-v1v2 2 delete