tos-dscp-mask

Use the tos-dscp-mask command to configure a ToS/DSCP marking value and mask, in hexadecimal. If WLAN marking is enabled, the ToS or DSCP value (only one or the other is present in the received packet) is taken from the WLAN. Enter the value/mask combination you want used.

The tos-dscp-mask command is accessible from within the cos:<named-cos> context.

tos-dscp-mask (tos-dscp/mask) | none

Parameters

tos-dscp Valid values, in hexadecimal., for ToS/DSCP are 0-FF.
mask Valid values, in hexadecimal., for mask are 0-FF.
none ToS /DSCP values are not used.

Usage

The slash (/) is a literal separator of tos/dscp and mask values.

Example

The following example configures a ToS-DSCP marking value (1E) and a mask value of FF:

EWC.extremenetworks.com:cos:my-cos# tos-dscp-mask 1E/FF