topology-name

Use the topology-name command to associate an already existing topology with a role. The topology-name command is accessible from the vnsmode:default-role context.

topology-name topology

Parameters

topology Specifies the name of the topology to configure for this vnsmode:default-role context.

Usage

Refer to VNS Commands (vnsmode) for information on configuring topologies.

Examples

The following example configures the default-role with the guestPortal topology:

EWC.extremenetworks.com:vnsmode:default-role# topology-name guestPortal
EWC.extremenetworks.com:vnsmode:default-role# apply
EWC.extremenetworks.com:vnsmode:default-role# show
Assigned topology: guestPortal
Ingress rate profile: Unlimited
Egress rate profile: Unlimited
Enable AP filtering: disable
Synchronize: enable
EWC.extremenetworks.com:vnsmode:default-role#