add-ospf-interface

Use the add-ospf-interface command to create a <named-ospfinterface>. The add-ospf-interface command is available from the ip:ospf:ospfinterface context of the CLI.

The add-ospf-interface command is available to the physical topology and the b@ac topology with the layer 3 interface configured. The ospf interface name must be created as a physical or b@ac topology in the topology context beforeyou execute this command.

add-ospf-interface ospf interface name

Parameters

ospf interface name Specifies the name for the new ospf interface. The name must already be created as a physical or b@ac topology in the topology context.

Examples

The following adds an ospfinterface with the name top1:

EWC.extremenetworks.com:ip:ospf:ospfinterface# add-ospf-interface top1