vlanid

Use the vlanid command to configure the VLAN ID of a physical topology or change the VLAN ID of b@ac or b@ap topologies. The vlanid command is available from the topology:<named-topology>:l2 context of the CLI for b@ac, b@ap, and physical topologies.

vlanid 1-4094

Parameters

1-4094 The VLAN ID that you want to assign to the topology.

Example

This following example sets the VLAN ID of the topology named test to 2:

EWC.extremenetworks.com:topology:test:l2# vlanid 2