interference-event-type

This command is only available on radio 2. Event types must be values from a bluetooth, microwave, cordless phone, constant wave, and/or video bridge.

interference-event-type (none | type1[, type2])

Parameters

none Set the event type to none.
type1[, type2] Specifies one or more event types from bluetooth, microwave, cordless phone, constant wave, and/or video bridge sources.
The following example sets the interference event type to none:
C5110-NAM.10.100.3.1:ap:defaults:ap37xx:radio2:dcs# interference-event-type none