cp-ssl

Use the cp-ssl command to enable or disable HTTPS support on a WLAN service configured for external authentication. The cp-ssl command is available only if mode is set to external. For more information about the mode command, see mode.

cp-ssl enable|disable

Parameters

enable Enable HTTPS support on the WLAN service configured for external authentication.
disable Disable HTTPS support on the WLAN service configured for external authentication.

Usage

By default, HTTPS support is disabled.

Example

The following example enables HTTPS support on the WLAN service:

EWC.extremenetworks.com:wlans:external_wlan:auth:captiveportal# cp-ssl enable
EWC.extremenetworks.com:wlans:external_wlan:auth:captiveportal# apply