mac

Use the mac command to enable or disable MAC based authentication. The mac command is accessible from the wlan:<WLAN-service-name>:auth context of the CLI.

mac enable | disable

Parameters

enable | disable Specifies to enable or disable MAC based authentication

Usage

The mac command is not available in the guest splash and guest portal authentication modes. For more information, see mode.

Example

The following example enables MAC authentication for the test WLANS:

EWC.extremenetworks.com:wlans:test:auth# mac enable
EWC.extremenetworks.com:wlans:test:auth# show mac
MAC based authorization: enable