show

Use the show command to display information about the load group. The show command is accessible from the ap:load-groups:<named-load-group> context of the CLI, for both types of load groups.

show

Parameters

None.

Examples

The following example displays information for the radio type load group radiogroup1:

EWC.extremenetworks.com:ap:load-groups:radiogroup1# show
Load Group ID: radiogroup1
Group Type:  radio
WLAN Assignment:
WLAN Name  Assigned
aaaa       x
Band Preference: disable
Load Control: disable
Maximum clients for radio1/radio2: 112/112
Radio Assignment:
Radio1  Radio2  AP Name
                0500008043050236