auto-tracking

Use the auto-tracking command to enable or disable auto-tracking. When auto-tracking is enabled, the RF Location engine tracks and reports the location of all associated users (users with sessions on the controller), up to the system limit (2,500).

The auto-tracking command is accessible from the location context.

auto-tracking (none|clients|all)

Parameters

none Location engine will auto-track on-demand users only.
clients Enables auto-tracking by location engine for associated clients and on-demand users.
all Enables auto-tracking by location engine for associated clients, on-demand users, and non-associated clients.

Example

The following example enables auto-tracking:

EWC.extremenetworks.com:location# auto-tracking all