Use the nonUnicastQuota command to specify the maximum percentage of time that the AP transmits non-unicast packets (broadcast and multicast traffic) for each configured Beacon period. For each non-unicast packet transmitted, the system calculates the airtime used by each packet and drops all packets that exceed the maximum percentage. By restricting non-unicast traffic, you limit the impact of broadcasts and multicasts on overall system performance. The nonUnicastQuota command is accessible from all ap: radio contexts of the CLI.
| value | Specifies the maximum non-unicast traffic percentage allowed. Valid values are 10-100. |
The following example sets the maximum non-unicast traffic percentage to 50%:
EWC.extremenetworks.com:ap:defaults:ap37xx:radio2# nonUnicastQuota 50
Print
this page
Email this topic
Feedback
View PDF
Download EPUB