Use the noise_threshold command to set the DCS noise threshold. The noise_threshold command is accessible from all radio dcs contexts of the CLI.
| thrshold | Specifies the DCS noise threshold in dB. The DCS noise threshold must be in the -95 to -50 range. ACS will scan for a new operating channel for the Wireless AP if the threshold is exceeded. |
The following example sets the noise threshold to -50 dB:
EWC.extremenetworks.com:ap:defaults:ap37xx:radio1:dcs# noise_threshold -50
Print
this page
Email this topic
Feedback
View PDF
Download EPUB