rateprf-in

Use the rateprf-in command to associate an already existing rate profile as an ingress rate profile for a CoS. The rateprf-in command is accessible from the cos:<named-cos> context.

rateprf-in profile | none

Parameters

profile Specifies the ingress rate profile to configure for this wlans:default-cos context.
none Specifies that the ingress rate profile is used for this wlans:default-cos context.

Usage

Refer to rateprofile for rate profile configuration information.

Examples

The following example configures the default-policy with the DocRateIn ingress rate profile:

EWC.extremenetworks.com:cos:my-cos# rateprf-in DocRateIn
EWC.extremenetworks.com:cos:my-cos# apply
EWC.extremenetworks.com:cos:my-cos# show
Assigned topology: guestPortal
Ingress rate profile: DocRateIn
Egress rate profile: Unlimited
Enable AP filtering: disable
Synchronize: enable
EWC.extremenetworks.com:cos:my-cos#