rogue-prevent

Use the rogue-prevent command to enable or disable the prevention of any station from using a rogue AP. The rogue-prevent command is accessible from the mitigator:scprof:<named scan profile> context of the CLI.

rogue-prevent enable | disable

Parameters

enable Enables the prevention of any station from using a rogue AP.
disable Disables the prevention of any station from using a rogue AP.

Example

The following example enables prevention of any station from using a rogue AP for the scp_name scan profile in-service:

EWC.extremenetworks.com:mitigator:scprof:in-service# rogue-prevent enable
EWC.extremenetworks.com:mitigator:scprof:in-service#