default-cos

Use the default-cos command to assign an existing Class of Service (CoS) as the default CoS for the specified WLAN service. You can also use the default-cos command to unassign the default cos. The default-cos command is accessible from the wlans:<WLAN-service-name> context of the CLI.

For information about Class of Service, refer to cos Commands.

default-cos named-cos | none

Parameters

named-cos Specify a named-cos to assign to the WLAN service as a default CoS.
none unassign the default CoS from the WLAN service

Example

The following example assigns the cos my-cos to the WLAN service:

EWC.extremenetworks.com:wlans:gp1# default-cos my-cos