move

Use the move command to change the order of multicast rules. The move command is available from the topology:<named-topology>:l2:multicast context of the CLI for b@ac, b@ap, and routed topologies.

move pos pos

Parameters

pos The current position of the multicast rule. Possible values are 0–255.
pos The new position of the multicast rule. Use a number one greater than the last rule to move a rule to the bottom of the list. Possible values are 0–255.

Example

This example moves multicast rule 2 to the bottom of the list (after position 4):

EWC.extremenetworks.com:topology:test:l2:multicast# move 2 5