tagged

Use the tagged command to enable or disable 802.1Q VLAN tagging. The tagged command is available from the topology:<named-topology>:l2 context of the CLI for b@ap, b@ac, and physical topologies.

tagged enable | disable

Parameters

enable Indicates that 802.1Q VLAN tagging will be enabled.
disable Indicates that 802.1Q VLAN tagging will be disabled.

Example

This following example enables 802.1Q VLAN tagging on the physical topology named esa1:
EWC.extremenetworks.com:topology:esa1:l2# tagged enable