wpa-v2-key-mgmt

Use the wpa-v2-key-mgmt command to configure WPA v2 key management options. The wpa-v2-key-mgmt command is accessible from the wlan:<WLAN-service-name>:priv context of the CLI.

After you run the wpa-v2-key-mgmt command, run the apply command to implement the name change.

wpa-v2-key-mgmt none | both | pre-auth | okc

Parameters

none | both | pre-auth | okc Specifies WPA v2 key management from these options, respectively: none, both pre-authorization and Opportunistic Key Caching (OKC), pre-authorization only, or OKC only

Usage

The wpa-v2-key-mgmt command is available when the privacy mode is set to wpa. This command is not available when the privacy mode is set to wpa-psk. For more information, see mode.

Example

The following example sets WPA v2 key management to both pre-authorization and Opportunistic Key Caching (OKC):

EWC.extremenetworks.com:wlans:test:priv# wpa-v2-key-mgmt both
EWC.extremenetworks.com:wlans:test:priv# apply
EWC.extremenetworks.com:wlans:test:priv# show wpa-v2-key-mgmt
Key Management Options: both