wlans-list

Use the wlans‐list command to assign Radio 1 and Radio 2 of APs to specific WLAN Services. For the AP3912, you can assign 1 - 3 port numbers to the service. See Usage for more information. Use the no command to remove radio assignment from specific WLAN Services. The wlans‐list command is accessible from the ap:defaults context of the CLI.

After you run the wlans‐list command, run the apply command to implement the changes in radio assignments.

wlans-list wlans-name | radio1 | radio2 | p1 | p2 | p3 no wlans-list wlans-name | radio1 | radio2 | p1 | p2 | p3

Parameters

wlans-name The name of the WLAN service.
radio1 5GHz radio.
radio2 2.4GHz radio.
p1 | p2 | p3 Specifies the client ports on the AP3912 to assign to the WLAN service.

Usage

For the AP3912:
  • A WLAN service can have one or more port assignments, but a client port can be assigned to only one WLAN service.
  • If the port does not have a WLAN service assignment, the port is disabled.
  • One policy definition for wired and wireless users. Users on wired ports receive the same default policy.
  • Wired ports can only be assigned to open WLAN services. There is no security or privacy on the client ports.

Examples

The following example assigns Radio 1 to CNL-209 WLANS:

EWC.extremenetworks.com:ap:defaults:assign# wlans-list CNL-209 radio1
EWC.extremenetworks.com:ap:defaults:assign# wlans-list CNL-209 p1