prate

Use the prate command to adjust the Protection Rate. The prate command is accessible from all ap: radio2 contexts of the CLI when radio mode includes 'g' (e.g. g, b/g, b/g/n, or n-strict).

prate ( 1 | 2 | 5.5 | 11 )

Parameters

1 | 2 | 5.5 | 11 Specifies the Protection Rate in Mbps

Example

The following example adjusts the Protection Rate to 5.5 Mbps:

EWC.extremenetworks.com:ap:defaults:ap37xx:radio2# prate 5.5