3rd-party

Use the 3rd-party command to enable or disable a third-party port in a physical topology. Only one physical topology can have 3rd-party set to enable. The 3rd-party command is available from the topology:<named-topology> context of the CLI for physical topologies.

3rd-party enable | disable

Parameters

enable Enables a 3rd-party port on the specified physical topology.
disable Disables a 3rd-party port on the specified physical topology.

Example

The following example enables a 3rd-party port on a physical topology:

EWC.extremenetworks.com:topology:esa0# 3rd-party enable
EWC.extremenetworks.com:topology:esa0# show
Name: esa0
3rd party: enable