adhoc

Use the adhoc command to enable or disable removal of network access from clients in adhoc mode. The adhoc command is accessible from the mitigator:scprof:<named scan profile> context and the mitigator:gsprof:<named guardian scan profile> context of the CLI.

After you run the adhoc command, run the apply command to implement the change.

adhoc (enable | disable)

Parameters

enable Enables removal of adhoc clients on this profile from network access
disable Disables removal of adhoc clients on this profile from network access

Example

The following example enables ad hoc client removal:

EWC.extremenetworks.com:mitigator:scprof:scp_name# adhoc enable
EWC.extremenetworks.com:mitigator:scprof:scp_name# apply