dot11e

Use the dot11e command to enable or disable 802.11e radio QoS support. The dot11e command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.

After you run the dot11e command, run the apply command to implement the changes.

dot11e enable | disable

Parameters

enable | disable Specify to enable or disable 802.11e radio QoS support

Example

The following example enables 802.11e support on the Wireless Appliance:

EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# dot11e enable
EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# apply
EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy# show dot11e
802.11e: enable
EWC.extremenetworks.com:wlans:CNL-7-CP:qos-policy#