antennamiddle

Use the antennamiddle command to select an antenna supported by the Wireless AP. This command is accessible from the <serial> context of the CLI if the AP supports configuration of a middle antenna. To display a list of the available antenna models, enter the command without arguments.

The antenna commands available are dependent on the AP type.

antennamiddle antenna_model

Parameters

antenna_model Model name of an antenna supported by the Wireless AP.

Examples

This example lists the valid antenna models that can be entered with this command, then executes the command with an appropriate model number:

EWC.extremenetworks.com:ap:0500010032150135# antennamiddle Usage: antennamiddle <antenna_model>
antenna_model:
<list of valid antenna models>
WS-ANT02 AG 4dBi Omni Factory
No Antenna
EWC.extremenetworks.com:ap:0500010032150135# antennamiddle WS-ANT02 AG 4dBi Omni Factory

This example removes a configured middle antenna:

EWC.extremenetworks.com:ap:0500010032150135# antennamiddle No Antenna