Displaying the SPB-PIM Gateway neighbor information

Use the following procedure to display the SPB-PIM Gateway interfaces neighbor information.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the SPB-PIM Gateway neighbor information:

    show ip spb–pim–gw neighbor [vrf WORD<0–16>] [vrfids WORD<0–512>]

Example

Switch:1>show ip spb-pim-gw neighbor

=============================================================================
                          Spb-pim-gw Neighbor - GlobalRouter
=============================================================================
INTERFACE ADDRESS         UPTIME                EXPIRE               
Vlan26    26.1.1.10       0 day(s), 00:11:36    0 day(s), 00:01:28   

Total SPB-PIM-GW Neighbors Displayed = 1/1
-----------------------------------------------------------------------------

Variable definitions

The following table defines parameters for the show ip spb-pim-gw neighbor command.

Variable

Value

vrf WORD<0-16>

Displays the SPB-PIM Gateway interface neighbor information for a specific VRF name.

vrfids WORD<0-512>

Displays the SPB-PIM Gateway interface neighbor information for a range of VRF IDs.
Note:

Enter a single VRF ID or multiple VRF IDs separated by ‘,‘ or enter a range of VRF IDs ‘x-y‘.