Displaying DHCP-relay Statistics for Specific Ports

Display individual DHCP-relay statistics for specific ports to manage network performance.

Note

Note

Slot and port information can differ depending on hardware platform.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. View DHCP-relay statistics for a specific port or VRF.

    show interfaces GigabitEthernet statistics dhcp-relay [vrf WORD<1-16>] [vrfids WORD<0-255>]|{slot/port[/sub-port][-slot/port[/sub-port]][,...]}}

Example

View DHCP-relay statistics:

Switch:1>enable
Switch:1#show interfaces gigabitethernet statistics dhcp-relay

================================================================================
                                Port Stats Dhcp
================================================================================
PORT_NUM VRF NAME         NUMREQUEST NUMREPLY  
--------------------------------------------------------------------------------
1/12     GlobalRouter     0          2         
1/13     GlobalRouter     3          2         
2/3      GlobalRouter     0          2         
--------------------------------------------------------------------------------

Variable Definitions

Use the data in the following table to use the show interfaces GigabitEthernet statistics dhcp-relay command.

Variable

Value

vrf WORD<0-16>

Specifies a VRF instance by VRF name.

vrfids WORD<0-255>

Specifies the ID of the VRF.

{slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Identifies the slot and port in one of the following formats: a single slot and port (1/1).

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Job Aid

The following table describes parameters for the show interfaces GigabitEthernet statistics dhcp-relay command output.

Table 1. show interfaces gigabitethernet statistics dhcp-relay field descriptions

Variable

Value

PORT_NUM

Indicates the port number.

VRF NAME

Identifies the VRF

NUMREQUEST

Indicates the total number of DHCP requests on this interface

NUMREPLY

Indicates the total number of DHCP replies on this interface.