Displaying the Controller admin status

Use the following procedure to display the admin status of the Controller.

Procedure

To enter User EXEC mode, log on to the switch.
Display the Controller Status:

show isis spbm

Example

Note

The SPB-PIM-GW column displays either Controller, Gateway, or Controller/Gateway if the Controller and or Gateway functionality is configured.

Switch:1>show isis spbm

============================================================================================
                                 ISIS SPBM Info

============================================================================================
SPBM       B-VID      PRIMARY    NICK     LSDB     IP       IPV6     MULTICAST   SPB-PIM-GW
INSTANCE              VLAN       NAME     TRAP    
--------------------------------------------------------------------------------------------
1          10,20      10         0.00.77  disable  enable   disable  enable      controller

============================================================================================
                              ISIS SPBM SMLT Info

============================================================================================
SPBM       SMLT-SPLIT-BEB       SMLT-VIRTUAL-BMAC     SMLT-PEER-SYSTEM-ID
INSTANCE  
--------------------------------------------------------------------------------------------
1          primary              00:00:00:00:00:00                        


--------------------------------------------------------------------------------
 Total Num of SPBM instances: 1
--------------------------------------------------------------------------------