Displaying the SPBM I-SID information

Use the following procedure to display the SPBM Service Instance Identifier (I-SID) information. The SPBM B-MAC header includes an I-SID with a length of 24 bits. This I-SID can be used to identify and transmit any virtualized traffic in an encapsulated SPBM frame.

Procedure

  1. In the navigation pane, expand Configuration > IS-IS.
  2. Click SPBM.
  3. Click the I-SID tab.

I-SID field descriptions

Use the data in the following table to use the I-SID tab.

Name

Description

SysId

Indicates the system identifier.

Vlan

Indicates the B-VLAN where this I-SID was configured or discovered.

Isid

Indicates the IS-IS SPBM I-SID identifier.

NickName

Indicates the nickname of the node where this I-SID was configured or discovered.

HostName

Indicates the host name listed in the LSP, or the system name if the host name is not configured.

Type

Indicates the SPBM I-SID type; either configured or discovered.