Viewing the OSPF external link-state database

View the LSDB to determine externally learned routing information. Information appears for all metric types or for the type you specify.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. View the OSPF autonomous system external (ASE) link-state advertisements:

    show ip ospf ase [metric-type <1-2>] [vrf WORD<1-16>] [vrfids WORD<0-512>]

Example

Switch:1#show ip ospf ase

================================================================================
                      OSPF AsExternal Lsas - GlobalRouter
================================================================================

LSTYPE     LINKSTATEID     ADV_ROUTER      ETYPE  METRIC  ASE_FWD_ADDR    AGE  SEQ_NBR    CSUM
--------------------------------------------------------------------------------

Variable definitions

The following table defines parameters for the show ip ospf ase command.

Variable

Value

metric-type <1-2>

Specifies the metric type.

vrf WORD<1-16>

Identifies the VRF by name.

vrfids WORD<0-512>

Specifies a VRF by ID.