Displaying MLD snooping configuration status

About this task

Use this procedure to display information about the MLD snooping configuration for the switch.

Procedure

Enter Privileged EXEC mode:

enable
Display the switch MLD snooping configuration status:

show ipv6 mld snooping

Example

Switch:1#show ipv6 mld snooping
================================================================================                                                                                                                  Mld Snooping - GlobalRouter
================================================================================                                                                                        
IFINDEX SNOOP   SSM     ACTIVE           MROUTER
        ENABLE  SNOOP   MROUTER          EXPIRATION
                ENABLE  PORTS            TIME
--------------------------------------------------------------------------------     
V666		False	False	NONE						 0
1 out of 1 entries displayed

Job Aid

The following table describes the column headings in the command output for show ipv6 mld snooping.

Variable	Description
IFINDEX	Identifies the index of the physical interface.
SNOOP ENABLE	Identifies whether snoop is enabled (true) or disabled (false).
SSM SNOOP ENABLE	Identifies whether SSM snoop is enabled (true) or disabled (false).
ACTIVE MROUTER PORTS	Displays all dynamic (querier port) and static mrouter ports that are active on the interface.
MROUTER EXPIRATION TIME	Specifies the time remaining before the multicast router is aged out on this interface. If the switch does not receive queries before this time expires, it flushes out all group memberships known to the VLAN. The Query Max Response Interval (obtained from the queries received) is used as the timer resolution.