Viewing VLAN information

View the VLAN information to display the basic configuration for all VLANs or a specified VLAN.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. View VLAN information:

    show vlan basic <1-4059>

  3. View advanced parameters:

    show vlan advance <1-4059>

Example

View VLAN information for VLAN 2:

Switch:1> show vlan basic 2

=====================================================================================
                                   Vlan Basic
=====================================================================================
VLAN                              INST
ID    NAME             TYPE         ID  PROTOCOLID SUBNETADDR      SUBNETMASK   VRFID

-------------------------------------------------------------------------------------
2     VLAN-2          byPort       0   none       N/A             N/A		   0

View VLAN information:

Switch:1> show vlan basic

=====================================================================================
                                   Vlan Basic
=====================================================================================
VLAN                              INST
ID    NAME             TYPE         ID  PROTOCOLID SUBNETADDR      SUBNETMASK   VRFID

-------------------------------------------------------------------------------------
1     Default          byPort       0   none       N/A             N/A		  0

2     abc              byPort       0   none       N/A             N/A		  0

3     VLAN-VRRP        byPort       0   none       N/A             N/A		  0

4     VLAN-6           byPort       0   none       N/A             N/A		  1

5     VLAN-7           byPort       0   none       N/A             N/A		  1

6     VLAN-8           byPort       0   none       N/A             N/A		  1

19    VLAN-9           byPort       0   none       N/A             N/A		  0

10    VLAN-10          byPort       0   none       N/A             N/A		  0

11    VLAN-11          byPort       0   none       N/A             N/A		  0

12    VLAN-12          byPort       0   none       N/A             N/A		  0

13    VLAN-13          spbm-bvlan   62  none       N/A             N/A		  0

14    VLAN-14          spbm-bvlan   62  none       N/A             N/A		  0

15    VLAN-15          byPort       1   none       N/A             N/A		  0

--More-- (q = quit)

View advanced parameters:

Switch:1> show vlan advance

================================================================================
                                  Vlan Advance
================================================================================
VLAN             IF    AGING MAC                USER
ID    NAME       INDEX TIME  ADDRESS            DEFINEPID ENCAP  DSAP/SSAP
--------------------------------------------------------------------------------
2     Default 2050  0     00:24:7f:9f:6a:03  0x0000

Variable definitions

Use the data in the following table to use optional parameters with the show vlan basic and show vlan advance commands.

Table 1. Variable definitions

Variable

Value

<1-4059>

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.