Displaying IS-IS areas
Use the following procedure to display IS-IS areas.
Procedure
Use the following procedure
to display IS-IS areas.
show isis manual-area
Example
Switch# show isis manual-area
================================================================================
ISIS Manual Area Address
================================================================================
AREA ADDRESS
--------------------------------------------------------------------------------
c0.2000.0000.00
Job aid
The following table describes the fields in the output for the show isis manual-area command.
|
Parameter |
Description |
|---|---|
|
AREA ADDRESS |
Shows the manual areas defined. There can only be one area. Use the same manual area across the entire SPBM cloud. The manual area can be from 1-13 bytes in length. |