ZTP+ Considerations

The following considerations apply to ZTP+:

• Only SNMP, Login, VLANs, and Ports configuration are supported for Extreme Management Center registration.

  

  Note

  ZTP+ cannot manage VLAN port membership. With ZTP+, new VLANs are created with no ports. Ports cannot be removed from the onboarding VLAN. Ports cannot be added to another VLAN. VLAN port membership is managed through Auto-sense functionality or through manual configuration after initial onboarding is complete.

• Only LLDP neighbor discovery is supported. Based on the LLDP discovery, port templates can be used on the Extreme Management Center server. Enabling or disabling LLDP is not supported.

• Fabric configurations are not supported with ZTP+. After ZTP+ is configured, Extreme Management Center server can use Simple Network Management Protocol (SNMP) to remotely configure Fabric-related configurations on the switch using SNMP MIBs.

• Only the OOB port or the Management VLAN interface are used to connect the Extreme Management Center server.

  

  Note

  ZTP+ cannot change the Management VLAN interface. If onboarding started on the Management onboarding VLAN, this cannot be changed while using ZTP+.