Viewing IP VRRPv3 Statistics

Use the following procedure to view IP VRRPv3 statistics to monitor network performance.

Procedure

Enter Privileged EXEC mode:

enable
Enter the following command to view VRRP statistics:

show ip vrrp statistics version <2–3>
Enter the following command to view VRRP statistics for the specified VRF:

show ip vrrp statistics vrf WORD<1–16> version <2–3>
Enter the following command to view VRRP statistics for the specified virtual router:

show ip vrrp statistics vrfids WORD<0–512> version <2–3>

Example

View IP VRRPv3 statistics:

Switch:1#show ip vrrp statistics
 
==========================================================================================
                        VRRP Global Stats - GlobalRouter
 
==========================================================================================
 
CHK_SUM_ERR   VERSION_ERR   VRID_ERR      VRRP_VERSION
------------------------------------------------------------------------------------------
0             0             0             2      
0             0             0             3      
 
=============================================================================================
                      VRRP Interface Stats - GlobalRouter
 
=============================================================================================
 
VRRP ID  P/V      BECOME_MASTER ADVERITSE_RCV VERSION
---------------------------------------------------------------------------------------------
3        3        1             0             2      
2        1/1      1             0             3      
 
VRRP ID  P/V      ADVERTISE_INT_ERR TTL_ERR       PRIO_0_RCV    VERSION
---------------------------------------------------------------------------------------------
 
3        3        0                 0             0             2      
2        1/1      0                 0             0             3      
 
VRRP ID  P/V      PRIO_0_SENT   INVALID_TYPE_ERR ADDRESS_LIST_ERR UNKNOWN_AUTHTYPE    VERSION
---------------------------------------------------------------------------------------------
3        3        0             0                0                0                   2      
2        1/1      0             0                0                0                   3      
 
VRRP ID  P/V      AUTHTYPE_ERR  PACKLEN_ERR   VERSION
---------------------------------------------------------------------------------------------
3        3        0             0             2      
2        1/1      0             0             3

Variable Definitions

Use the data in the following table to use the ip vrrp version command.


Variable	Value
`version`	Configures the VRRP version on the specified interface.
`<2–3>`	Specifies the version of VRRP (2 or 3) to be configured on the specified interface.
`vrf WORD<1–16>`	Specifies the name of the VRF.
`vrfids WORD<0–512>`	Specifies the ID of the VRF, and is an integer in the range of 0–512.