IGMP router-alert

Use the show ip igmp router-alert command to display the status of IGMP router alert. The syntax for this command is as follows.

show ip igmp router-alert [vrf WORD <0-16>] [vrfids WORD <0-512>]

Note

This command is not supported on a node configured as the DvR Leaf within the DvR domain.

The following table shows the field descriptions for this command.

Table 1. show ip igmp router-alert command
Field	Description
IFINDEX	Indicates the interface index number.
ROUTER ALERT ENABLE	Indicates the status of the router alert check.